Equalizer / Locking Cable and Nylon Sheave Kit for SPO7

Equalizer and Locking Cable and Sheave Revamp Kit for Rotary Lift Model SPO7

This Revamp Kit for Rotary Lift SPO7 includes Nylon Sheaves, Equalizer Cables, Spacers, Retaining Rings, Sheave Shafts, Lock Cable Sheaves, Locking Latch Release Cable, Cable Guides, and Hex Head Cap Screws.

A Revamp Kit with Steel Sheaves is also available—Check out BH-7500-950S

One part number, one complete kit to make ordering a breeze. Freshen up the entire equalizer and lock release cable systems on select Rotary Lifts with an overhaul. Each kit comes complete with everything you need to do a quick and complete face-lift. Enhance your service opportunities and increase customer confidence and satisfaction today with SVI.

More Revamp Kits Available for Rotary SPO / SPOA Series—Contact SVI today for revamp kits specific to other models.

Let SVI know if you would like additional quick and convenient “easy-order” kits for any other service need or make and model of lift. Kit pricing is far more attractive than the time and costs associated with ordering all the items individually. Service, Value and Innovation — SVI is your Answer!

In addition, SVI offers a wide variety of cable sheaves or pulleys, so don’t forget to replace sheaves and pulleys at the same time. Auto, car, bus, vehicle, and truck lifts and hoists can be easily maintained for years of trouble-free use with SVI on your side!

SVI is a premier, well-known expert supplier, and your best option for replacement parts for Rotary Lifts. SVI has you covered!

Auto Lift Cables • Car Lift Cables
Truck Lift Cables • Bus Lift Cables

Standard and Custom cables available. In-Stock Cables or repair parts ship same-day.

SVI offers the largest selection of Auto Lift, Truck Lift, Bus Lift, Vehicle Lift, or Car Lift Cables in the industry. Contact us today!

Safety First: Replace Auto Lift Cables at First Sign of Wear

All wire rope cables generally wear both from the inside and outside. Inside wear is much less significant and is caused as the cables are pulled across the cable pulleys or sheaves. This wear is caused by what is termed nicking and can appear on internal strands with an almost scalloped look. External wear on cables is much more apparent and is essentially abrasive wear. Abrasive wear is the result of metal being slowly worn away or removed over time. This appears on the crowns of each wire with a flattening of the wire appearance. As the wires flatten, material is being lost. Since the strength of the cable continues to lessen, the cable becomes weaker. Additionally, almost everyone at some point has seen frayed rope. This is a condition where unraveling, worn, or separated strands become evident. If this is observed to be happening on any wire rope cable assembly, immediately cease use of the equipment with this type of worn cable and replace the cable as well as the sheaves or pulleys immediately.

As a rule, if you own an auto lift or anything that uses wire rope cables, you should at a minimum conduct monthly visual inspection of the cables and sheaves or pulleys. This is especially important if your cable-driven equipment is frequently used. If you are starting to witness the small round strands comprising each cable assembly starting to flatten and then even flatter, it is time to consider replacing the affected cables. Most cables on auto lifts or even any equipment including winches are easy to replace and the costs are relatively minimal. If you do not wish to replace the cable assembly yourself, there are many companies that specialize in auto lift installation and service that can help you.

If you cannot locate an auto lift repair shop, Contact SVI and we will attempt to help you find someone in your area to properly replace your cables.