Home > Products > Manitowoc Lifts > Manitowoc Lifts - Service Parts
K31459 Seal Kit
For use on all above-ground lift cylinders on GFF, GBT, CFF, CBT and CTL-60 Series Lifts, and AMS-20 Moble Workstation Bottom Stage.
Note: See A-491-250 Seal Removal Tool and A-491-251 Spanner Wrench to make seal kit replacement easy on above-ground lifts. A-491-250 Removal Tool is not required on CTL-60 and AMS-20.
K34115 7-1/2" Single Lip Urethane Seal Kit
For use on the following:
Lift Models: A-12C30, A-12D30, A12E30, A-12M30, A-12M50, A-12030, A-12130, A-1CJ30, A-5CM30, and A-6CM30
Note: This Seal Kit (K34115) is also good if the Model Numbers in "0" thru "9." If the Model Number ends with a letter "A" thru "Z," use Seal Kit K34300 (8-1/2" Dia. Plunger).
Cylinder Assembly: T08971, T09205, T11934, T11936, T11937, T11896, and T11984
Note: This Seal Kit (K34115) is also good for any of the numbers above that end with a dash number, such as T08971-01.
Use Seal Insertion Took Kit K34138.
K34300 8-1/2" Double Lip Urethane Seal Kit
For use on the following:
Lift Models: A-12D-3A, A-12E3A, A-12M3A, A-12M5A, A-12N3A, A-12J3A, A-5CM3A, and A-6CM3A.
Note: This Seal Kit (K34300) is also good if the Model Numbers end in "A" thru "Z". If the Model Number ends with a number "0" thru "9," use Seal Kit K34115 (7-1/2" Dia. Plunger).
Cylinder Assembly: T13916, T13921, and T13922
Note: This Seal Kit (K34300) is also good for any of the numbers above that end with a dash number, such as T13922-01
Use Seal Insertion Took Kit K34153.
K34113 10-5/8" Double Lip Urethane Seal Kit
For use on the following:
Lift Models: A-1AA10, A-1AA30, A-1AB10, A-1AB30, A-1A030, A-1AP10, A-1AP30, A-1AR10, A-1AR30, A-1AV10, A-1AV30, A-1A110, A-1A130, A-1A210, A-1A230, A-1CJ30, A-2BF30, A-2BG30, A-2BM30, A-3BM50, A-3FM50, A-3FT50, A-3GT50, A-5CM30, A-6CM50, A-8BM60, A-8FT60, A-9BM60, 12 & 13, 14 & 15, 18-00, 18-01, 18-20, 18-21, 18-30, 18-40, 18-41C, 19-00, 19-01, 19-20, 19-21, 19-30, 19-40, 20-30, 20-40, 30-30, 30-40, 31-30, 31-40, 40-30, 40-40, 41-40, 78-40, 79-40, FCF 2, 4, & 6, and FCS 3, 5, & 7
Note: This Seal Kit (K34113) is also good if the Model Numbers end in “0” thru “9”. If the Model Number ends with a letter “A” thru “Z”, use Seal Kit K34301.
Cylinder Assembly: TO5141, TO5238, TO5351, TO5352, TO5360, TO6144, TO6177, TO6876, TO7783, TO7909, TO7999, TO8287, TO8354, TO8360, TO8563, TO8612, TO9408, TO9494, TO9507, TO9508, T11918, T11997, T13124, T13126, W01697, and W01699.
Note: This Seal Kit (K34113) is also good for any of the numbers above that end with a dash number, such as T08354-01.
Use Seal Insertion Took Kit K34118.
K34301 10-5/8" Double Lip Urethane Seal Kit
For use on the following:
Lift Models: A-1AA1, A1AA3A, A-1AB1A, A-1AB3A, A-1A11A, A-1A13A, A-1AN1A, A-1AN3A, A-2BJ3A, A-BM3A, A-3BM5A, A-5CM3A, A-6CM5A, and A-3FM5A.
Note: This Seal Kit (K34301) is also good if the Model Numbers end in “A” thru “Z”. If the Model Number ends with a number “0” thru “9”, use Seal Kit K34113.
Cylinder Assembly: T13944, T13945, T13946, T13952, T13959, and T14000.
Note: This Seal Kit (K34301) is also good for any of the numbers above that end with a dash number, such as T13944-01.
Seal Insertion Tool Kit Not Required.
K34133 Pinion Support and Shaft Assembly Kit
For use on Models 12D and 12L with Hydraulic Cylinders 89-3/4" on Center
K34134 Pinion Support and Shaft Assembly Kit
For use on Models 12E and 12N with Hydraulic Cylinders 57-1/2" on Center
K34104 Single-Post Drive-Over Crosshead & Lift Pads Kit
Used to convert alignment lift to single-post swing rail drive-over lift.
Kit contains (4) swing arms, crosshead, slide bases, pick-up pads, and fasteners.
Note: Capacity 8,000 lb. / 2,000 lb./swing arm
K34109 12E Super Structure and Lift Pad Kit
Used to convert two post side by side alignment lift to drive thru swing rail lift.
For lifts with cylinder assemblies 57 1/2" on center.
Kit includes (4) swing arms, (2) anchor plates, slide bases, pick-up pads, and fasteners.
Note: Capacity 4,000 lb./side / 2,000 lb./swing arm.
K34330 Arm Restraint Retro-Fit Kit
For use on Model 12D
Note: Swing Arms Not Included. Drilling Existing Arms Required
Note: Capacity 8,000 lb. / 2,000 lb./swing arm
K34310 Rear Retro-Fit Kit (Auto Leg)
For use on Model A-3FM5A Series Lifts
Kit includes entire rear replacement with dual 10-5/8" dia. full hydraulic cylinders.
Non-EnviroKote coated dual cylinder assembly
Note: 36,000 lb. capacity
K34311 Rear Retro-Fit Kit (Auto Leg)
For use on Model A-3FM5A Series Lifts
Kit includes entire rear replacement with dual 10-5/8" dia. full hydraulic cylinders.
EnviroKote coated dual cylinder assembly
Note: 36,000 lb. capacity
K34312 Rear Retro-Fit Kit (Remote Leg)
For use on Model A-3FM5A Series Lifts
Kit includes entire rear replacement with dual 10-5/8" dia. full hydraulic cylinders.
Non-EnviroKote coated dual cylinder assembly
Note: 36,000 lb. capacity
K34313 Rear Retro-Fit Kit (Remote Leg)
For use on Model A-3FM5A Series Lifts
Kit includes rear replacement with dual 10-5/8" dia. full hydraulic cylinders.
EnviroKote coated dual cylinder assembly
Note: 36,000 lb. capacity
K34306 Rear Retro-Fit Kit (Auto Lock, Non-EnviroKoted)
For use on Models: 2BM, 3BM, 5CM, and 6CM
Kit includes entire rear replacement with 10-5/8" dia. full hydraulic cylinder.
Non-EnviroKote coated cylinder assembly
Note: 18,000 lb. capacity
K34307 Rear Retro-Fit Kit (Auto Lock, EnviroKoted)
For use on Models: 2BM, 3BM, 5CM, and 6CM
Kit includes entire rear replacement with 10-5/8" dia. full hydraulic cylinder.
EnviroKote coated cylinder assembly
Note: 18,000 lb. capacity
K34305 Front Moveable Conversion Kit (Auto Lock, Non-EnviroKoted)
This kit is used to convert old-style 2BM and 3BM with floating bearings at front to new style 2-BM3A and 3-BM5A with replaceable upper bearing only.
Non-EnviroKote coated cylinder assembly
Kit includes all fasteners, forward pick-up base, cylinder assembly, complete lock leg assembly, carriage assembly, and (2) trench covers adjacent to cylinder.
Kit Requirements:
Existing Track Width: 17-13/16"
Existing Pit Depth: 94" (from finished floor to bottom of pit)
Note: 18,000 lb. capacity
K34308 8-1/2" Rear Retro-Fit Kit (Non-EnviroKoted)
For use on Models: 12M3 and 12M5
Kit includes entire rear replacement with 8-1/2" dia. full hydraulic cylinder.
Non-EnviroKote coated cylinder assembly
K34309 8-1/2" Rear Retro-Fit Kit (EnviroKoted)
For use on Models: 12M3 and 12M5
Kit includes entire rear replacement with 8-1/2" dia. full hydraulic cylinder.
EnviroKote coated cylinder assembly
K34348 Front 7-1/2" to 8-1/2" Retro-Fit Kit
This kit used to convert old-style 12M3, 12M5, 5CM, and 6CM with 7-1/2" plunger/cylinder assemblies to 8-1/2" plunger/cylinder assemblies with replaceable upper bearing only.
Non-EnviroKote coated cylinder assembly
Kit includes all fasteners, forward pick-up base, cylinder assembly, complete lock leg assembly, carriage assembly, and (2) trench covers adjacent to cylinder.
Kit Requirements:
Existing Track Width: 14-3/4"
Existing Pit Depth: 92" (from finished floor to bottom of pit)
Note: 18,000 lb. capacity
K34351 Front Retro-Fit Kit (Remote Leg)
This kit is used to replace 2BM and 3BM complete front plunger/cylinder assemblies. This kit is also used to convert old-style 2BM and 3BM with floating bearings at front to new-style 2-BM3A and 3-BM5A with replaceable upper bearing only.
Non-EnviroKote coated cylinder assembly
Kit includes all fasteners, forward pick-up base, cylinder assembly, complete lock leg assembly, carriage assembly, and (2) trench covers adjacent to cylinder.
Kit Requirements:
Existing Track Width: 17-13/16"
Existing Pit Depth: 94" (from finished floor to bottom of pit)
Note: 18,000 lb. capacity
K34354 Rear Retro-Fit Kit (Remote Leg, EnviroKoted)
For use on Models: 5CM, 6CM, 2BM, and 3BM
Kit includes entire rear replacement with 10-5/8" dia. full hydraulic cylinder.
EnviroKote coated cylinder assembly
K34355 Rear Retro-Fit Kit (Remote Leg, Non-EnviroKoted)
For use on Models: 5CM, 6CM, 2BM, and 3BM
Kit includes entire rear replacement with 10-5/8" dia. full hydraulic cylinder.
Non-EnviroKote coated cylinder assembly
K34352 Replacement Control Box Kit (Remote Lock)
For use on Models: 3BM5 and 3FM5
Kit includes the entirely redesigned control box. New box comes with easy maintenance features and quieter operation.
K34353 Replacement Control Box Kit (Auto Lock)
For use on Models: 3BM5 and 3FM5
Kit includes the entirely redesigned control box. New box comes with easy maintenance features and quieter operation.
Replacement Power Units at Competitive Prices
We now offer replacement power units retro-fitable to virtually any make of 2HP unit.
These power units are available in multiple psi operating pressures. Please specify operating pressure needed (on tag) when placing order.
Sleeve & Adapter Assembly
Manitowoc Lift's 4-position flip-pad adapter & sleeve assembly (BH-9320-13 / N20366-01) fits a 1-1/2" x 6" steel arm.
Check out Manitowoc's Lift Accessories!
|
|
