Complete Locking Equalizer Assembly with Racks

Rack and Pinion Equalizer Assembly for Weaver & Challenger Lifts

Description:

Rack and Pinion kit for side by side in-ground lifts with 7-1/2” diameter cylinders spaced 57-1/2” center to center apart.

Description Details:

• Fits Model(s): EC-081, EC-881, EC-881, C881, C881LS, C885
• Plunger or Piston Centers: 57-1/2” (1460.5mm)
• Plunger Diameters: 7-1/2” (190.5mm)
• Auto Locking: Yes

Special Note(s): This kit contains everything necessary to restore or rebuild the locking rack and pinion equalizer system. 

This kit can be shipped by UPS or common carrier.

Content Listing:

• (2) Rack Bars BH-9612 Ref# 1080670. 79-1/8” (2009.6mm) long x 1-7/8” (47.4mm) square
• (2) Pinion Gears BH-9613 Ref# S-24522. 4-5/16” (114.7mm) diameter for 1-1/4” (31.7mm) diameter cross shaft
• (2) Pinion Keys BH-9614-06 Ref# S-189112 ¼” (6.3mm) x 1” (25.4mm) long
• (1) Cross Shaft BH-9614-01 Ref# S-24187 63-3/8” (1609.7mm) long x 1-1/4” (31.7mm) diameter with keyway slots and retaining ring grooves
• (2) Retaining rings for cross shaft BH-9614-05 Ref# S-18912
• (2) Round Spacer BH-9614-04 Ref# S-23515
• (1) Auto Locking Bracket BH-9614-10 Ref# KL-345
• (1) Non-Locking Bracket BH-9614-02 Ref# AS-27522
• (1) Non-Locking Thick Bracket Spacer BH-9614-03 Ref# S-2407
• (1) Non-Locking Thin Bracket Spacer BH-9614-08 Ref# S-2406
• (2) Hex Head Cap Screw F-HC-0500-13-4750 ½-13 x 4-3/4”
• (2) Hex Head Cap Screw F-HC-0500-13-3250 ½-13 x 3-1/4”
• (4) Lock Washers F-LW-0500 ½”

Alternative nomenclature or also known as:

• Rack and pinion balancing components
• Rack and pinion equalizing components
• Rack and pinion stabilizer components
• Rack and pinion synchronizing components

Uses: auto lifts, car lifts, light truck lifts, vehicle lifts, van lifts, bus lifts

SVI is a premier, well-known expert supplier, and your best quality and cost option for replacement parts for Weaver Lifts. SVI is your answer!

Standard and Custom product solutions are available. In-Stock products and repair parts ship same-day.

Safety First: Replace worn components at first sign of wear.

Weaver lift officially got its start in 1910 and after some changes in ownership over the years the company was finally acquired and closed in 1989, sort of. In 1994 SVI International, Inc. a State of Illinois Corporation assumed the role as the largest and only non-stop supplier of repair parts for Weaver lifts. Over time, SVI reinvigorated the entire in-ground lift product line and still produces Weaver style lifts to this very day.

SVI is a prominent and very well-respected member of the automotive lift industry. In fact, did you know that long ago SVI’s founder supplied the Weaver Lift Company with some of the key components used in the production of the lifts? Yes, SVI has, for well over 40 years, always been engaged in the automotive lift industry, supplying SVI competitors and lift service professionals alike with products used to both repair and produce auto, truck, bus and car lifts.

For in-ground automotive lifts SVI is the go-to source for parts, new hydraulic cylinders, new lift replacement sections for fore and aft heavy-duty lifts and complete new in-ground lifts. SVI is one of the last remaining companies in the United States that possesses the equipment and skills needed to build in-ground lifts and specialty lifting cylinders for unique industrial applications.    

As a major lift manufacturer SVI has had the good fortune to acquire some of the best-known lift manufacturers known to the industry, such as Globe Lift, Manitowoc Lift, the former Gilbarco Lift Division and the intellectual property of the once prominent Benwil Lift Company. SVI has acquired RELS Manufacturing, Ronflo Manufacturing and the former Miller and Smith Steel Fabrication Company. 

SVI has exceptional skill, vast capabilities, and innovative know how. That’s why in the industries we serve, SVI is your answer! Virtually all Weaver lifts can be repaired, never let anyone tell you parts or products are products are no longer available, it’s a lie!